Torpedo bats differ from standard wooden bats in several ways: first, the barrel of the bat, which retains a somewhat similar length to the standard's barrel, is shifted several inches up the bat, toward the knob/handle side. This, in turn, means the end of the barrel on a torpedo bat does not correspond with the end of the bat itself, as is the case on many standard bats. Instead, the barrel ends a few inches from the end, and the bat's thickness thins slightly past the barrel toward the end. In turn, there is no indented cup on a torpedo bat, as there would be on a standard bat (for force dissipation purposes).
OBR 3.02 is comprised of three provisions, so we began with part (a), which states, "The bat shall be a smooth, round stick not more than 2.61 inches in diameter at the thickest part and not more than 42 inches in length. The bat shall be one piece of solid wood."
The torpedo bat changes the standard bat shape by shifting the barrel toward the handle, but does not change the barrel's thickness nor the overall bat's total length. Therefore, provision (a) is satisfied.
OBR 3.02(b) states, "Cupped Bats. An indentation in the end of the bat up to 1¼ inches in depth is permitted and may be no wider than two inches and no less than one inch in diameter. The indentation must be curved with no foreign substance added."
Due to its shifted barrel design, the torpedo bat general has no indented cup, which, because 3.02(b) permits intendtation, but does not require it, does not apply.
OBR 3.02(c) states, "The bat handle, for not more than 18 inches from its end, may be covered or treated with any material or substance to improve the grip. Any such material or substance that extends past the 18-inch limitation shall cause the bat to be removed from the game."
Finally, because a torpedo bat does not alter the standard handle length, provision (c) is also satisfied.
Accordingly, we find a torpedo bat is indeed legal. | Video as follows:
